SZ72B Linux Kernel log
From MalaWiki
Back to Vaio VGN-SZ72B.
[ 0.000000] Linux version 2.6.21-rc3-mm2-1 (mattia@tadamune) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #19 SMP Sun Mar 11 13:15:42 CET 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f570000 end: 000000003f670000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003f670000 size: 0000000000090000 end: 000000003f700000 type: 4 [ 0.000000] copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f670000 (usable) [ 0.000000] BIOS-e820: 000000003f670000 - 000000003f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6480 [ 0.000000] Entering add_active_range(0, 0, 259696) 0 entries of 256 used [ 0.000000] sizeof(struct page) = 32 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259696 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259696 [ 0.000000] On node 0 totalpages: 259696 [ 0.000000] Node 0 memmap at 0xc1000000 size 8323072 first pfn 0xc1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 236 pages used for memmap [ 0.000000] HighMem zone: 30084 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F63B0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3F6764EF, 0048 (r1 Sony N0 20060710 PTL 0) [ 0.000000] ACPI: FACP 3F67DDDE, 0084 (r2 Sony N0 20060710 PTL 5A) [ 0.000000] ACPI: DSDT 3F677E33, 5FAB (r1 Sony N0 20060710 PTL 100000E) [ 0.000000] ACPI: FACS 3F67EFC0, 0040 [ 0.000000] ACPI: APIC 3F67DE62, 0068 (r1 Sony N0 20060710 PTL 5A) [ 0.000000] ACPI: BOOT 3F67DFD8, 0028 (r1 Sony N0 20060710 PTL 1) [ 0.000000] ACPI: MCFG 3F67DF02, 003C (r1 Sony N0 20060710 PTL 5A) [ 0.000000] ACPI: TCPA 3F67DF3E, 0032 (r1 Sony N0 20060710 PTL 5A52) [ 0.000000] ACPI: APIC 3F67DF70, 0068 (r1 Sony N0 20060710 PTL 0) [ 0.000000] ACPI: SSDT 3F6776B1, 077E (r1 Sony N0 20060710 PTL 20050624) [ 0.000000] ACPI: SSDT 3F676EE6, 07CB (r1 Sony N0 20060710 PTL 20050624) [ 0.000000] ACPI: SSDT 3F676537, 04E2 (r1 Sony N0 20060710 PTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 257668 [ 0.000000] Kernel command line: root=/dev/sda3 ro vga=extended resume=/dev/sda5 clocksource=pmtmr [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1833.536 MHz processor. [ 12.151149] Console: colour VGA+ 80x50 [ 12.156190] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 12.156529] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.176517] Memory: 1025932k/1038784k available (1890k kernel code, 12232k reserved, 711k data, 220k init, 121280k highmem) [ 12.176613] virtual kernel memory layout: [ 12.176614] fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) [ 12.176615] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.176616] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 12.176617] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 12.176618] .init : 0xc0392000 - 0xc03c9000 ( 220 kB) [ 12.176619] .data : 0xc02d8b4d - 0xc038a8d4 ( 711 kB) [ 12.176620] .text : 0xc0100000 - 0xc02d8b4d (1890 kB) [ 12.177131] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.257287] Calibrating delay using timer specific routine.. 3671.25 BogoMIPS (lpj=7342515) [ 12.257448] Security Framework v1.0.0 initialized [ 12.257515] Capability LSM initialized [ 12.257587] Mount-cache hash table entries: 512 [ 12.257733] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 12.257740] monitor/mwait feature present. [ 12.257802] using mwait in idle threads. [ 12.257868] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.257974] CPU: L2 cache: 2048K [ 12.258036] CPU: Physical Processor ID: 0 [ 12.258098] CPU: Processor Core ID: 0 [ 12.258160] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 12.258166] Intel machine check architecture supported. [ 12.258233] Intel machine check reporting enabled on CPU#0. [ 12.258302] Compat vDSO mapped to ffffe000. [ 12.258372] Checking 'hlt' instruction... OK. [ 12.273390] SMP alternatives: switching to UP code [ 12.273612] ACPI: Core revision 20070126 [ 12.279622] Parsing all Control Methods: [ 12.279842] Table [DSDT](id 0001) - 923 Objects with 104 Devices 193 Methods 29 Regions [ 12.280106] Parsing all Control Methods: [ 12.280276] Table [SSDT](id 0002) - 13 Objects with 3 Devices 4 Methods 0 Regions [ 12.280546] Parsing all Control Methods: [ 12.280724] Table [SSDT](id 0003) - 14 Objects with 3 Devices 5 Methods 0 Regions [ 12.280993] Parsing all Control Methods: [ 12.281172] Table [SSDT](id 0004) - 13 Objects with 0 Devices 4 Methods 0 Regions [ 12.281317] tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired [ 12.315955] evxfevnt-0091 [02] enable : Transition to ACPI mode successful [ 12.316143] CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 12.316311] SMP alternatives: switching to SMP code [ 12.316391] Booting processor 1/1 eip 3000 [ 12.326970] Initializing CPU#1 [ 12.533051] Calibrating delay using timer specific routine.. 3667.24 BogoMIPS (lpj=7334497) [ 12.533056] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 12.533061] monitor/mwait feature present. [ 12.533064] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.533066] CPU: L2 cache: 2048K [ 12.533067] CPU: Physical Processor ID: 0 [ 12.533069] CPU: Processor Core ID: 1 [ 12.533070] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 12.533075] Intel machine check architecture supported. [ 12.533078] Intel machine check reporting enabled on CPU#1. [ 12.533440] CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 12.534188] Total of 2 processors activated (7338.50 BogoMIPS). [ 12.534452] ENABLING IO-APIC IRQs [ 12.534714] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 12.788980] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 12.809087] Brought up 2 CPUs [ 12.861584] migration_cost=34 [ 12.861935] NET: Registered protocol family 16 [ 12.862078] ACPI: bus type pci registered [ 12.862152] PCI: Using MMCONFIG [ 12.863050] Setting up standard PCI resources [ 12.868291] evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 12.869220] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 5 Runtime GPEs in this block [ 12.870100] Completing Region/Field/Buffer/Package initialization:......................................................................... [ 12.874869] Initialized 29/29 Regions 4/4 Fields 29/29 Buffers 11/38 Packages (972 nodes) [ 12.875009] Initializing Device/Processor/Thermal objects by executing _INI methods:... [ 12.876182] Executed 3 _INI methods requiring 2 _STA executions (examined 117 objects) [ 12.876335] ACPI: Interpreter enabled [ 12.876398] ACPI: (supports S0 S3 S4 S5) [ 12.876704] ACPI: Using IOAPIC for interrupt routing [ 12.896809] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 12.896940] Boot video device is 0000:00:02.0 [ 12.897525] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 12.897595] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 12.897712] 0000:00:1f.1: trying to change BAR0 from 0000 to 01F0 [ 12.897780] 0000:00:1f.1: trying to change BAR1 from 0000 to 03F4 [ 12.897849] 0000:00:1f.1: trying to change BAR2 from 0000 to 0170 [ 12.899545] 0000:00:1f.1: trying to change BAR3 from 0000 to 0374 [ 12.900701] PCI: Transparent bridge - 0000:00:1e.0 [ 12.900851] PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses') [ 12.900937] Please report the result to linux-kernel to fix this permanently [ 12.901077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 12.901638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 12.901887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 12.902122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 12.902357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 12.902626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 12.909881] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5 [ 12.910293] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 12.910656] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 12.911019] ACPI: PCI Interrupt Link [LNKD] (IRQs *10) [ 12.911381] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. [ 12.911833] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 12.912196] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [ 12.912560] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 12.912897] Linux Plug and Play Support v0.97 (c) Adam Belay [ 12.912975] pnp: PnP ACPI init [ 12.916355] pnp: PnP ACPI: found 11 devices [ 12.916422] PnPBIOS: Disabled by ACPI PNP [ 12.916610] SCSI subsystem initialized [ 12.916704] libata version 2.20 loaded. [ 12.916738] PCI: Using ACPI for IRQ routing [ 12.916805] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 12.917038] NET: Registered protocol family 8 [ 12.917102] NET: Registered protocol family 20 [ 12.917207] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 12.917290] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 12.917373] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 12.917456] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 12.920744] Time: tsc clocksource has been installed. [ 12.947816] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [ 12.947887] PCI: Bridge: 0000:00:1c.0 [ 12.947952] IO window: 2000-2fff [ 12.948018] MEM window: d6000000-d7ffffff [ 12.948085] PREFETCH window: d0000000-d1ffffff [ 12.948153] PCI: Bridge: 0000:00:1c.1 [ 12.948215] IO window: disabled. [ 12.948282] MEM window: dc100000-dc1fffff [ 12.948348] PREFETCH window: disabled. [ 12.948414] PCI: Bridge: 0000:00:1c.2 [ 12.948478] IO window: 3000-3fff [ 12.948544] MEM window: d8000000-d9ffffff [ 12.948611] PREFETCH window: d2000000-d3ffffff [ 12.948679] PCI: Bridge: 0000:00:1c.3 [ 12.948745] IO window: 4000-4fff [ 12.948811] MEM window: da000000-dbffffff [ 12.948878] PREFETCH window: d4000000-d5ffffff [ 12.948952] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 12.949017] IO window: 00005000-000050ff [ 12.949084] IO window: 00005400-000054ff [ 12.949151] PREFETCH window: 50000000-53ffffff [ 12.949218] MEM window: 54000000-57ffffff [ 12.949285] PCI: Bridge: 0000:00:1e.0 [ 12.949349] IO window: 5000-5fff [ 12.949415] MEM window: dc000000-dc0fffff [ 12.949481] PREFETCH window: 50000000-53ffffff [ 12.949569] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.949698] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.949719] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 12.949847] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.949868] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 12.949997] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 12.950018] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 12.950146] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.950158] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 12.950182] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 12.950335] NET: Registered protocol family 2 [ 12.988712] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 12.988858] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 12.989678] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 12.989997] TCP: Hash tables configured (established 131072 bind 65536) [ 12.990066] TCP reno registered [ 13.000912] Simple Boot Flag at 0x37 set to 0x1 [ 13.001446] audit: initializing netlink socket (disabled) [ 13.001525] audit(1173624184.468:1): initialized [ 13.001669] highmem bounce pool size: 64 pages [ 13.001865] JFS: nTxBlock = 8016, nTxLock = 64135 [ 13.005280] io scheduler noop registered [ 13.005393] io scheduler anticipatory registered [ 13.005502] io scheduler deadline registered [ 13.005620] io scheduler cfq registered (default) [ 13.006067] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.006119] assign_interrupt_mode Found MSI capability [ 13.006239] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.006278] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.006306] Allocate Port Service[0000:00:1c.0:pcie03] [ 13.006402] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.006453] assign_interrupt_mode Found MSI capability [ 13.006556] Allocate Port Service[0000:00:1c.1:pcie00] [ 13.006585] Allocate Port Service[0000:00:1c.1:pcie02] [ 13.006616] Allocate Port Service[0000:00:1c.1:pcie03] [ 13.006710] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.006761] assign_interrupt_mode Found MSI capability [ 13.006864] Allocate Port Service[0000:00:1c.2:pcie00] [ 13.006898] Allocate Port Service[0000:00:1c.2:pcie02] [ 13.006925] Allocate Port Service[0000:00:1c.2:pcie03] [ 13.007018] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.007070] assign_interrupt_mode Found MSI capability [ 13.007172] Allocate Port Service[0000:00:1c.3:pcie00] [ 13.007200] Allocate Port Service[0000:00:1c.3:pcie02] [ 13.007228] Allocate Port Service[0000:00:1c.3:pcie03] [ 13.008047] ACPI: SSDT 3F676CB5, 01A8 (r1 Sony N0 20060710 PTL 20050624) [ 13.008284] Parsing all Control Methods: [ 13.008523] Table [SSDT](id 0073) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 13.008853] ACPI: SSDT 3F676A19, 0217 (r1 Sony N0 20060710 PTL 20050624) [ 13.009056] Parsing all Control Methods: [ 13.009290] Table [SSDT](id 0074) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 13.010496] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 13.010694] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.011404] ACPI: SSDT 3F676E5D, 0089 (r1 Sony N0 20060710 PTL 20050624) [ 13.011618] Parsing all Control Methods: [ 13.011854] Table [SSDT](id 0079) - 3 Objects with 0 Devices 3 Methods 0 Regions [ 13.012184] ACPI: SSDT 3F676C30, 0085 (r1 Sony N0 20060710 PTL 20050624) [ 13.012380] Parsing all Control Methods: [ 13.012614] Table [SSDT](id 007A) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 13.013516] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 13.013713] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.014093] cpuidle: using driver acpi_idle [ 13.017179] isapnp: Scanning for PnP cards... [ 13.371432] isapnp: No Plug & Play device found [ 13.373680] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 13.374698] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 13.374855] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 13.374924] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 13.375037] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 13.375116] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 13.375246] ICH7: chipset revision 2 [ 13.375309] ICH7: not 100% native mode: will probe irqs later [ 13.375385] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio [ 13.375563] Probing IDE interface ide0... [ 13.450146] Switched to high resolution mode on CPU 0 [ 13.450148] Switched to high resolution mode on CPU 1 [ 14.107949] hda: MATSHITADVD-RAM UJ-842S, ATAPI CD/DVD-ROM drive [ 14.443651] hda: selected mode 0x42 [ 14.444068] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 14.446631] ata_piix 0000:00:1f.2: version 2.10ac1 [ 14.446636] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] [ 14.446919] ata_piix 0000:00:1f.2: invalid MAP value 0 [ 14.599213] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 14.599351] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 14.599390] ata1: SATA max UDMA/133 cmd 0x000118d0 ctl 0x000118c6 bmdma 0x000118b0 irq 22 [ 14.599499] ata2: SATA max UDMA/133 cmd 0x000118c8 ctl 0x000118c2 bmdma 0x000118b8 irq 22 [ 14.599592] scsi0 : ata_piix [ 14.772724] ata1.00: ATA-6: TOSHIBA MK1032GSX, AS021G, max UDMA/100 [ 14.772793] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 14.788675] ata1.00: configured for UDMA/100 [ 14.788743] scsi1 : ata_piix [ 14.954145] ATA: abnormal status 0x7F on port 0x000118cf [ 14.954291] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5 [ 14.954449] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 14.954525] sda: Write Protect is off [ 14.954588] sda: Mode Sense: 00 3a 00 00 [ 14.954602] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.954722] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 14.954796] sda: Write Protect is off [ 14.956505] sda: Mode Sense: 00 3a 00 00 [ 14.956520] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.956605] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 15.055439] sd 0:0:0:0: Attached scsi disk sda [ 15.055611] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 15.058081] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.058149] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.058278] mice: PS/2 mouse device common for all mice [ 15.058434] TCP bic registered [ 15.058503] NET: Registered protocol family 1 [ 15.058569] NET: Registered protocol family 17 [ 15.058686] Starting balanced_irq [ 15.058755] Using IPI No-Shortcut mode [ 15.081278] input: AT Translated Set 2 keyboard as /class/input/input0 [ 15.217869] VFS: Mounted root (jfs filesystem) readonly. [ 15.218050] Freeing unused kernel memory: 220k freed [ 18.140585] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 18.140740] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 18.140769] sky2 0000:07:00.0: v1.13 addr 0xd8000000 irq 18 Yukon-FE (0xb7) rev 1 [ 18.141100] sky2 eth0: addr 00:13:a9:41:76:84 [ 18.438866] input: PC Speaker as /class/input/input1 [ 18.718130] usbcore: registered new interface driver usbfs [ 18.718225] usbcore: registered new interface driver hub [ 18.718312] usbcore: registered new device driver usb [ 18.828866] input: PS/2 Mouse as /class/input/input2 [ 18.838885] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 18.900169] ieee80211_crypt: registered algorithm 'NULL' [ 18.952303] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 18.952374] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 18.991927] USB Universal Host Controller Interface driver v3.0 [ 18.992042] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 18.992175] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 18.992179] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 18.992362] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 18.992475] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 [ 18.992578] usb usb1: new device found, idVendor=0000, idProduct=0000 [ 18.992647] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.992716] usb usb1: Product: UHCI Host Controller [ 18.992781] usb usb1: Manufacturer: Linux 2.6.21-rc3-mm2-1 uhci_hcd [ 18.992848] usb usb1: SerialNumber: 0000:00:1d.0 [ 18.992978] usb usb1: configuration #1 chosen from 1 choice [ 18.993066] hub 1-0:1.0: USB hub found [ 18.993133] hub 1-0:1.0: 2 ports detected [ 19.021046] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 19.021481] Uniform CD-ROM driver Revision: 3.20 [ 19.073270] tpm_inf_pnp 00:07: Found TPM with ID IFX0102 [ 19.073401] tpm_inf_pnp 00:07: TPM found: config base 0x2e, data base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 19.095166] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 19.095301] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 19.095305] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 19.095391] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 19.095498] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 19.095597] usb usb2: new device found, idVendor=0000, idProduct=0000 [ 19.095665] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.095734] usb usb2: Product: UHCI Host Controller [ 19.095798] usb usb2: Manufacturer: Linux 2.6.21-rc3-mm2-1 uhci_hcd [ 19.095866] usb usb2: SerialNumber: 0000:00:1d.1 [ 19.095975] usb usb2: configuration #1 chosen from 1 choice [ 19.096061] hub 2-0:1.0: USB hub found [ 19.096204] hub 2-0:1.0: 2 ports detected [ 19.138340] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0dmpr [ 19.138432] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 19.174930] Real Time Clock Driver v1.12ac [ 19.199077] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19 [ 19.199213] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 19.199217] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 19.199299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 19.199407] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001860 [ 19.199510] usb usb3: new device found, idVendor=0000, idProduct=0000 [ 19.199578] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.199647] usb usb3: Product: UHCI Host Controller [ 19.199713] usb usb3: Manufacturer: Linux 2.6.21-rc3-mm2-1 uhci_hcd [ 19.199781] usb usb3: SerialNumber: 0000:00:1d.2 [ 19.199893] usb usb3: configuration #1 chosen from 1 choice [ 19.199980] hub 3-0:1.0: USB hub found [ 19.200046] hub 3-0:1.0: 2 ports detected [ 19.302951] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.303088] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 19.303092] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 19.303176] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 19.303285] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 [ 19.303384] usb usb4: new device found, idVendor=0000, idProduct=0000 [ 19.303452] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.303521] usb usb4: Product: UHCI Host Controller [ 19.303586] usb usb4: Manufacturer: Linux 2.6.21-rc3-mm2-1 uhci_hcd [ 19.303654] usb usb4: SerialNumber: 0000:00:1d.3 [ 19.303769] usb usb4: configuration #1 chosen from 1 choice [ 19.303858] hub 4-0:1.0: USB hub found [ 19.303926] hub 4-0:1.0: 2 ports detected [ 19.406902] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 19.407217] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 19.407396] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 19.408429] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 19.438742] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 19.559949] Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6] [ 19.560042] Yenta: Using CSCINT to route CSC interrupts to PCI [ 19.560109] Yenta: Routing CardBus interrupts to PCI [ 19.560186] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 19.560309] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 19.560444] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 19.560448] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 19.560537] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 19.560648] ehci_hcd 0000:00:1d.7: debug port 1 [ 19.560717] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 19.560725] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc544000 [ 19.564673] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.564769] usb usb5: new device found, idVendor=0000, idProduct=0000 [ 19.564837] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.564905] usb usb5: Product: EHCI Host Controller [ 19.564970] usb usb5: Manufacturer: Linux 2.6.21-rc3-mm2-1 ehci_hcd [ 19.565037] usb usb5: SerialNumber: 0000:00:1d.7 [ 19.565159] usb usb5: configuration #1 chosen from 1 choice [ 19.565246] hub 5-0:1.0: USB hub found [ 19.565312] hub 5-0:1.0: 8 ports detected [ 19.578159] usb 2-1: device descriptor read/all, error -71 [ 19.791157] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 19.791228] Socket status: 30000006 [ 19.791292] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 19.791376] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 19.791445] cs: IO port probe 0x5000-0x5fff: clean. [ 19.791819] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff [ 19.791889] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 19.793999] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 19.794140] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 20.164491] cs: IO port probe 0x100-0x3af: clean. [ 20.166921] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 20.168059] cs: IO port probe 0x820-0x8ff: clean. [ 20.168941] cs: IO port probe 0xc00-0xcf7: clean. [ 20.169991] cs: IO port probe 0xa00-0xaff: clean. [ 20.488653] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k [ 20.697572] usb 5-4: new high speed USB device using ehci_hcd and address 3 [ 20.892876] usb 5-4: new device found, idVendor=054c, idProduct=0281 [ 20.892947] usb 5-4: new device strings: Mfr=1, Product=2, SerialNumber=3 [ 20.893016] usb 5-4: Product: UMH-U09 [ 20.893078] usb 5-4: Manufacturer: Sony [ 20.893142] usb 5-4: SerialNumber: F000001C9B3A [ 20.893286] usb 5-4: configuration #1 chosen from 1 choice [ 21.179695] Initializing USB Mass Storage driver... [ 21.372944] usb 5-6: new high speed USB device using ehci_hcd and address 5 [ 21.505945] usb 5-6: new device found, idVendor=05ca, idProduct=1830 [ 21.506015] usb 5-6: new device strings: Mfr=0, Product=0, SerialNumber=0 [ 21.506162] usb 5-6: configuration #1 chosen from 1 choice [ 21.580766] Linux video capture interface: v2.00 [ 21.896114] loop: loaded (max 8 devices) [ 21.928518] scsi2 : SCSI emulation for USB Mass Storage devices [ 21.928629] usb-storage: device found at 3 [ 21.928631] usb-storage: waiting for device to settle before scanning [ 21.928650] usbcore: registered new interface driver usb-storage [ 21.928719] USB Mass Storage support registered. [ 21.928796] r5u870-0: Detected Sony VGP-VCC2 (VAIO SZ) [ 21.929454] usbcore: registered new interface driver r5u870 [ 21.954994] sony-laptop: method: name: GBRT, args 0 [ 21.955063] sony-laptop: method: name: SBRT, args 1 [ 21.955130] sony-laptop: method: name: GPBR, args 0 [ 21.955198] sony-laptop: method: name: SPBR, args 1 [ 21.955265] sony-laptop: method: name: PWAK, args 0 [ 21.955332] sony-laptop: method: name: PWRN, args 0 [ 21.955399] sony-laptop: method: name: CSXB, args 1 [ 21.955464] sony-laptop: method: name: GWDP, args 0 [ 21.955531] sony-laptop: method: name: CDPW, args 1 [ 21.955600] sony-laptop: method: name: GCDP, args 0 [ 21.955666] sony-laptop: method: name: SLRS, args 1 [ 21.955733] sony-laptop: method: name: RBMF, args 1 [ 21.955798] sony-laptop: method: name: RSBI, args 1 [ 21.955865] sony-laptop: method: name: CBMF, args 1 [ 21.955933] sony-laptop: method: name: AZPW, args 1 [ 21.956003] sony-laptop: method: name: GAZP, args 0 [ 21.956071] sony-laptop: method: name: LNPW, args 1 [ 21.956137] sony-laptop: method: name: GLNP, args 0 [ 21.956205] sony-laptop: method: name: SCAM, args 1 [ 21.956272] sony-laptop: method: name: GCAM, args 0 [ 21.961626] sony-laptop: Found brightness_default getter: GPBR [ 21.961697] sony-laptop: Found brightness_default setter: SPBR [ 21.961768] sony-laptop: Found cdpower getter: GCDP [ 21.961835] sony-laptop: Found cdpower setter: CDPW [ 21.961903] sony-laptop: Found audiopower getter: GAZP [ 21.961970] sony-laptop: Found audiopower setter: AZPW [ 21.962037] sony-laptop: Found lanpower getter: GLNP [ 21.962103] sony-laptop: Found lanpower setter: LNPW [ 21.962178] ACPI Sony Notebook Control Driver v0.4 successfully installed [ 22.014387] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 22.016026] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 22.016121] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 22.016188] sonypi: device allocated minor is 63 [ 22.016725] input: Sony Vaio Jogdial as /class/input/input4 [ 22.024587] input: Sony Vaio Keys as /class/input/input5 [ 22.163003] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 22.168216] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 22.346332] usb 3-1: new device found, idVendor=0483, idProduct=2016 [ 22.346417] usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.346486] usb 3-1: Product: Biometric Coprocessor [ 22.346551] usb 3-1: Manufacturer: STMicroelectronics [ 22.346702] usb 3-1: configuration #1 chosen from 1 choice [ 22.587840] usb 2-1: new low speed USB device using uhci_hcd and address 4 [ 22.761270] usb 2-1: new device found, idVendor=046d, idProduct=c001 [ 22.761354] usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.761423] usb 2-1: Product: USB Mouse [ 22.761487] usb 2-1: Manufacturer: Logitech [ 22.761634] usb 2-1: configuration #1 chosen from 1 choice [ 23.003440] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 23.156371] usb 4-1: new device found, idVendor=054c, idProduct=01bb [ 23.156443] usb 4-1: new device strings: Mfr=0, Product=0, SerialNumber=0 [ 23.156594] usb 4-1: configuration #1 chosen from 1 choice [ 23.399070] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 23.602964] usb 4-2: new device found, idVendor=044e, idProduct=300c [ 23.603036] usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 23.603105] usb 4-2: Product: UGX [ 23.603167] usb 4-2: Manufacturer: ALPS [ 23.603317] usb 4-2: configuration #1 chosen from 1 choice [ 23.607181] usbcore: registered new interface driver hiddev [ 23.621710] input: Logitech USB Mouse as /class/input/input6 [ 23.621827] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1 [ 23.622098] usbcore: registered new interface driver usbhid [ 23.622165] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 24.295862] Bluetooth: Core ver 2.11 [ 24.296215] NET: Registered protocol family 31 [ 24.296279] Bluetooth: HCI device and connection manager initialized [ 24.296348] Bluetooth: HCI socket layer initialized [ 24.337057] Bluetooth: HCI USB driver ver 2.9 [ 24.340421] usbcore: registered new interface driver hci_usb [ 26.208603] ipw3945: Detected geography ABG (13 802.11bg channels, 12 802.11a channels) [ 26.435653] eth1 renamed to eth2 [ 26.933040] scsi 2:0:0:0: Direct-Access Sony USB HS-CARD 4.52 PQ: 0 ANSI: 0 [ 26.981770] sd 2:0:0:0: Attached scsi removable disk sdb [ 26.982810] usb-storage: device scan complete [ 42.373951] ACPI: Battery Slot [BAT1] (battery present) [ 42.426487] ACPI: AC Adapter [ACAD] (on-line) [ 42.449481] input: Lid Switch as /class/input/input7 [ 42.449738] ACPI: Lid Switch [LID0] [ 42.450000] input: Power Button (CM) as /class/input/input8 [ 42.450143] ACPI: Power Button (CM) [PWRB] [ 42.530489] ACPI: Thermal Zone [ATF0] (53 C) [ 42.531748] ACPI: Thermal Zone [DTS0] (50 C) [ 42.533010] ACPI: Thermal Zone [DTS1] (55 C) [ 46.312665] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 46.467626] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 46.467754] NFSD: starting 90-second grace period [ 47.732238] NET: Registered protocol family 10 [ 49.574531] Bluetooth: L2CAP ver 2.8 [ 49.574608] Bluetooth: L2CAP socket layer initialized [ 49.836099] Bluetooth: RFCOMM socket layer initialized [ 49.836193] Bluetooth: RFCOMM TTY layer initialized [ 49.836271] Bluetooth: RFCOMM ver 1.8 [ 105.303449] usb 2-1: USB disconnect, address 4 [ 198.151092] ip_tables: (C) 2000-2006 Netfilter Core Team [ 198.266658] Netfilter messages via NETLINK v0.30. [ 198.315533] nf_conntrack version 0.5.0 (8115 buckets, 64920 max) [ 208.815786] eth2: no IPv6 routers present
